windows2003下面无法显示sd读卡器的解决办法

T61，上面集成了sd读卡器，可惜装了win2003以后就是找不到读卡器，连设备管理器也不提示。

在网上查了半天，不得要领。终于还是上了thinkpad的网站，发现了驱动。按照readme说的去做，才发现需要用“添加硬件”。汗，我记得是有这个东西，但在设备管理器里一直没找到。

把readme放在这里吧，也许好搜索一些：

October 22, 2003

Readme file for Windows SD Std Host Controller bus/storage drivers

Version 6.0.4050.1

======================================================================

What This Package Does
———————-
   This package contains following files.

   – The Secure Digital Host Controller driver for Windows 2000/XP
   – Secure Digital Storage Device driver for Windows 2000/XP

Released Versions
—————–
   Version 6.0.4050.1

Installation Guide
——————
1) To install Secure Digital Host Controller driver, do follwing:

    A) For Windows XP:
      1. Copy the ZIP file to your HDD. Then unzip it to the folder.
      2. Start Add Hardware Wizard.
            2-1. Click "Start" then "Control Panel"
            2-2. Cick "Printers and Other Hardware"
            2-3. Click "Add Hardware Wizard" (in "See Also").
      3. Click "Next" then select "Yes, I have already connected
         the hardware" and click "Next"
      4. Select "PCI Device", then click "Next" and "Finish".
      5. The Hardware Update Wizard opens.
      6. Select "Install from a list or specific location (Advanced)",
         and click "Next".
      7. Select "Search for the best driver in these locations."
      8. Check "Include this location in the search:" then imput
         the location and click "Next".
      9. Follow the instructions to complete the installation.

    B) For Windows 2000:
      1. Copy the ZIP file to your HDD. Then unzip it to the folder.
      2. Open Add/Remove Hardware Wizard.
            2-1. Click "Start", "Settings", "Control Panel"
            2-2. Open "Add/Remove Hardware"
      3. Click "Next" then select "Add/Troubleshoot a device" Next"
      4. Select "PCI Device" then click "Next" and "Finish"
      5. Upgrade Device Driver Wizard opens.
      6. Select "Search for a suitable driver for my device"
         and click Next.
      7. Check "Specify a location" then click "Next"
      8. Imput the location of the files and click "OK".
      9. Follow the instructions to complete the installation.

2) To install Secure Digital Storage Device driver, do follwing:

     1. Insert Secure Digital Storage Device in SD card Slot.
     2. "Found New Hardware Wizard" opens.
     3. Follow the instructions to install from the location of
        the files as wrote in above.

Trademarks
———-
   * Windows are registered trademarks of Microsoft Corporation.